Removing The 8X 2.5-Inch Hdd/Ssd Front Panel; Removing The 2.5-Inch Hdd/Ssd Bay Top Cover; Installing The Second 2.5-Inch Hdd/Ssd Sas Backplane - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Hard disk drives (HDD) / solid state drives (SSD)

7.4.10.2 Removing the 8x 2.5-inch HDD/SSD front panel

Figure 139: Removing the 8x 2.5-inch HDD/SSD front panel
Ê Remove four screws from the 8x 2.5-inch HDD/SSD front panel.
Ê Pull up the 8x 2.5-inch HDD/SSD front panel to disengage it from the
chassis.
Ê Remove the 8x 2.5-inch HDD/SSD front panel.

7.4.10.3 Removing the 2.5-inch HDD/SSD bay top cover

Ê Remove the 2.5-inch HDD/SSD bay cover, see section
inch HDD/SSD bay top cover" on page

7.4.10.4 Installing the second 2.5-inch HDD/SSD SAS backplane

Ê Install the second 2.5-inch HDD/SSD SAS backplane and the second HDD
cage, see section
page 218.
224
"Installing a 2.5-inch HDD/SSD SAS backplane" on
Upgrade and Maintenance Manual
"Removing the 2.5-
212.
TX1330 M4