4.5
Reassembling
V
CAUTION!
Before attaching the covers, make sure no unnecessary parts or tools
●
are left inside the server.
In order to comply with applicable EMC regulations (regulations on
●
electromagnetic compatibility) and satisfy cooling requirements, the
server must not run while the top/side cover is removed.
For further safety information, see chapter
●
page
37.
4.5.1
Rack model
4.5.1.1
Installing the rack front cover
Figure 20: Installing the rack front cover
Ê Fit the rack front cover on the server front.
Ê Ensure that the rack mounting brackets properly engage on both sides of the
chassis as shown in the close-up.
TX1330 M4
Upgrade and Maintenance Manual
Basic hardware procedures
"Important information" on
67