Replacing The Tpm; Preliminary Steps - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

14.3.3 Replacing the TPM

Field Replaceable Unit
(FRU)
Tools: Removing the system board:
– Phillips PH2 / (+) No. 2 screw driver
Replacing the TPM:
– Bit screw driver
– TPM bit insert
– thin slotted screw driver (2 x 0.4 mm)
– Flat nose pliers
( )
* For Japan:
– Dedicated TPM screw driver (CWZ8291A)
– TPM module fixing tool (S26361-F3552-L909)
V
CAUTION!
Advise your contact persons that they must provide you with all recovery
keys which belong to the system to restore them in the TPM later.

14.3.3.1 Preliminary steps

"Locating the defective server" on page 51
Ê
"Suspending BitLocker functionality" on page 97
Ê
"Shutting down the server" on page 53
Ê
"Disconnecting the power cord" on page 54
Ê
"Getting access to the component" on page 55
Ê
Ê Remove the system fan module, see section
module" on page 81
Ê If applicable, remove the expander board, see section
expander board" on page 255
Ê If applicable, "Removing expansion cards" on page 285
TX1330 M4
( )
*
Upgrade and Maintenance Manual
System board and components
Hardware: 40 minutes
( )
*
"Removing the system fan
"Removing the SAS
395