Table of Contents
Advertisement
42
IP Routing Commands
Example
This example sets the authentication mode to plain text.
Console(config)#interface vlan 1
Console(config-if)#ip rip authentication mode text
Console(config-if)#
Related Commands
ip rip authentication key (42-14)
show rip globals
This command displays global configuration settings for RIP.
Command Mode
Privileged Exec
Example
Console#show rip globals
RIP Process: Enabled
Update Time in Seconds: 30
Number of Route Change: 0
Number of Queries: 1
Console#
Field
RIP Process
Update Time in Seconds
Number of Route Changes
Number of Queries
show ip rip
This command displays information about interfaces configured for RIP.
Syntax
show ip rip {configuration | status | peer}
• configuration - Shows RIP configuration settings for each interface.
• status - Shows the status of routing messages on each interface.
• peer - Shows information on neighboring routers, along with information
about the last time a route update was received, the RIP version used by
the neighbor, and the status of routing messages received from this
neighbor.
Command Mode
Privileged Exec
42-16
Table 42-6 show rip globals - display description
Description
Indicates if RIP has been enabled or disabled.
The interval at which RIP advertises known route information.
(Default: 30 seconds)
Number of times routing information has changed.
Number of router database queries received by this router.
Advertisement
Table of Contents
