Table B-6. Contrast Levels - Thermo Scientific 5028i Instruction Manual

C-Link Protocol Commands
Hardware Configuration
Hardware
Configuration
B-46 Model 5028i Instruction Manual
set temp th a/b value
This command sets the heater temperature threshold for the sample
to value, where value is a floating-point number representation of
temperature threshold between 0 to 70 °C. The following example sets
the temperature threshold to 35 °C.
Send: set temp th a 35
Receive: set temp th a 35 ok
Send: set temp th b 35
Receive: set temp th b 35 ok
contrast
This command reports the screen's level of contrast. The following
example shows the screen contrast is 55%, according to
Send: contrast
Receive: contrast 11: 55%
set contrast level
This command sets the screen's level of contrast, according to
The following example sets the contrast level to 50%.
Send: set contrast 10
Receive: set contrast 10 ok
Table B–6. Contrast Levels
Level
Contrast Level
0 0%
1 5%
2 10%
3 15%
4 20%
5 25%
6 30%
7 35%
8 40%
9 45%
10 50%
11 55%
12 60%
13 65%
14 70%
15 75%
Table B–6.
Table B–6.
Thermo Fisher Scientific