Installation
Setup
2-8
Model 5028i Instruction Manual
Figure 2–2. Model 5028i Side View—inches [millimeters]
It is also important to locate the roof flange installation in vertical
alignment with the inlet of the instrument. By reviewing the top
view drawing of the instrument
centered in direct alignment with the 5/8-inch OD tube entering the
5028i instrument.
Figure 2–3. Model 5028i Top View—inches [millimeters]
Heater
Once the x-y coordinates of the instrument and roof flange system are
established and a waterproof flange system has been installed, perform a
(Figure
2–2), the roof flange must be
Thermo Fisher Scientific