Flow - Thermo Scientific 5028i Instruction Manual

Detector Status
Thermo Fisher Scientific

Flow

The Flow screen (read only) displays the current sample flow reading.
The flow is measured by the internal pressure board sensors.
Note Flow B settings please refer to Flow as following description.
In the Main Menu, choose Diagnostics > Flow.
l
The Detector Status screen (read only) displays the current sample mass
reading, alpha counts, and beta counts.
Note A mass value will only be calculated when the flowrate is within
acceptable limits. However, when in Service Mode, a mass value will be
calculated if the pump is turned OFF.
Note Detector B settings please refer to Detector as following
description.
In the Main Menu, choose Diagnostics > Detector Status.>Detector
l
status or Detector status B
CRn
The CRn screen (read only) displays the current CRn reading.
In the Main Menu, choose Diagnostics > CRn or CRn B.
l
PRESSURE/VACUUM:
BAROMETRIC
VACUUM
FLOW
VACUUM B
FLOW B
RANGE AVG
FLOW:
FLOW B:
RANGE AVG
s
DETECTOR STATUS:
MASS
ALPHA
BETA
BETA CORR
BETA ZERO
RANGE AVG
760.1 mm Hg
60.5 mm Hg
21.5 mm Hg
60.5 mm Hg
21.5 mm Hg
DIAGS ALARM
16.67 LPM
16.67 LPM
DIAGS ALARM
s
0 ug
2 1/sec
13577 1/sec
13577 1/sec
6500 1/sec
DIAGS ALARM
Model 5028i Instruction Manual
Operation
Diagnostics Menu
s
3-55