Thermo Scientific 5028i Instruction Manual page 8

Continuous particulate monitor
Table of Contents

Advertisement

About This Manual
Safety
Safety and Equipment
Damage Alerts
ii
Model 5028i Instruction Manual
Appendix C
l
MODBUS Protocol Interface and is supported both over RS-
232/485 (RTU protocol) as well as TCP/IP over Ethernet.
Appendix D
l
description of the Gesytec (Bayern-Hessen or BH) Protocol
Interface and is supported both over RS-232/485 as well as TCP/IP
over Ethernet.
Appendix E
l
the ESM Protocol commands (from the prior FH62 platform) that
can be used to remotely control an analyzer using a host device such
as a PC or datalogger.
Safety
Review the following safety information carefully before using the
analyzer. This manual provides specific information on how to operate
the analyzer, however, if the analyzer is used in a manner not specified
by the manufacturer, the protection provided by the equipment may be
impaired.
This manual contains important information to alert you to potential
safety hazards and risks of equipment damage. Refer to the following
types of alerts you may see in this manual.
Safety and Equipment Damage Alert Descriptions
Alert
Safety and Equipment Damage Alerts in this Manual
Alert
"MODBUS
Protocol" provides a description of the
"Gesytec (Bayern-Hessen)
"ESM Protocol
Description
DANGER
A hazard is present that could result in death or serious
personal injury if the warning is ignored.
WARNING
A hazard or unsafe practice could result in serious
personal injury if the warning is ignored.
CAUTION
A hazard or unsafe practice could result in minor to
moderate personal injury if the warning is ignored.
Equipment Damage A hazard or unsafe practice could result in property
damage if the warning is ignored.
Description
WARNING
The Model 5028i is supplied with a three-wire grounded
power cord. Under no circumstances should this
grounding system be defeated.
If the equipment is operated in a manner not specified
by the manufacturer, the protection provided by the
equipment may be impaired.
The service procedures in this manual are restricted to
qualified service personnel only.
Protocol" provides a
Commands" provides a description of
s
s
s
s
s
s
s
Thermo Fisher Scientific

Advertisement

Table of Contents
loading

Table of Contents