Thermo Scientific 5028i Instruction Manual page 112

Operation
Alarms Menu
Instrument Configuration
Contact Information
Alarms Menu
3-58 Model 5028i Instruction Manual
SET ANALOG OUTPUTS:
SETTING:
OUTPUT SET TO:
SET TO FULL SCALE
SET TO ZERO
RESET TO NORMAL
RANGE
The Instrument Configuration screen displays information on the
hardware configuration of the instrument.
Note If the analyzer is in service mode, pressing
selected item between yes and no.
In the Main Menu, choose Diagnostics > Instrument Configuration.
l
INSTRUMENT CONFIGURATION:
>I/O EXPANSION BOARD YES
DETECTOR
DETECTOR B
RANGE
The Contact Information screen displays the customer service
information.
In the Main Menu, choose Diagnostics > Contact Information.
l
CONTACT INFORMATION:
CALL CENTER: 508-520-0430
WWW.THERMOFISHER.COM
RANGE
The alarms menu allows the user to view a set of alarms for different
boards and displays a list of items that are monitored by the analyzer.
The number of alarms detected is displayed to indicate how many
alarms have occurred. If no alarms are detected, the number zero is
displayed.
If the item being monitored goes outside the lower or upper limit, the
status of that item will go from "OK" to either "LOW" or "HIGH",
respectively. If the alarm is not a level alarm, the status will go from "OK"
to "FAIL". The number of alarms detected is displayed to indicate how
many alarms have occurred. If no alarms are detected, the number zero
is displayed.
AVG DIAGS ALARM
s
CHANGE VALUE
AVG DIAGS ALARM
AVG DIAGS ALARM
ALL
NORMAL
will toggle the
BETA
BETA
SAVE
Thermo Fisher Scientific