Thermo Scientific 5028i Instruction Manual page 249

Thermo Fisher Scientific
Command Description
rh th a/b Reports/sets the current relative humidity threshold for the
detector
ri (right) Simulates pressing right pushbutton
ru (run) Simulates pressing run pushbutton
sample rh a/b Reports the sample relative humidity
save Stores parameters in FLASH
save params Stores parameters in FLASH
sc (screen) C-series legacy command that reports a generic response (Use
iscreen instead)
sp field Reports/sets item number and name in scratch pad list
sr Reports the last srec stored
srec Reports maximum number of srecs
srec format Reports/sets output format for srecs (ASCII or binary)
srec layout Reports current layout of srec data
srec mem size Reports maximum number of srecs that can be stored
srec per Reports/sets srec logging period
stream per Reports/sets current time interval for streaming data
stream time Reports/sets a time stamp to streaming data or not
tape counter Reports the number of counts corresponding to the filter tape
movement
tape to ncal ratio Reports/sets tape/zero ratio
a/b
temp comp Reports/sets temperature compensation to actual or standard B-45
temp std a/b Reports/sets the standard temperature
temp th a/b Reports/sets the temperature threshold for the detector
thermal mass Reports/sets the current thermal mass coefficient
coef a/b
time Reports/sets current time (24-hour format)
tz Reports/sets the timezone string for the NTP server
up Simulates pressing up pushbutton
vac mass coef a/ Reports/sets the current vacuum mass coefficient
b
vac pres a/b Reports the current vacuum pressure
vac pres offset Reports the vacuum pressure offset
a/b
vac pres span a/ Reports/sets the vacuum pressure span
b
vf pres cal def Sets vacuum and flow pressure calibration defaults
C-Link Protocol Commands
Commands
B-44
B-38
B-38
B-22
B-48
B-48
B-39
B-28
B-25
B-25
B-26
B-27
B-27
B-27
B-29
B-29
B-22
B-38
B-45
B-45
B-36
B-48
B-54
B-38
B-37
B-22
B-22
B-37
B-38
Model 5028i Instruction Manual
Page
B-9