Thermo Scientific 5028i Instruction Manual page 102

Operation
Instrument Controls Menu
Decimal Places
3-48 Model 5028i Instruction Manual
Descriptor The Descriptor screen allows the user to enter the descriptor, or
name, for the selected analog input channel. The descriptor is used in
datalogging and streaming data to report what data is being sent out.
The descriptor may be from 1 to 3 characters in length, and defaults to
IN1 to IN8 (user input channel number).
In the Main Menu, choose Instrument Controls > I/O
l
Configuration > Analog Input Config > select Channel >
Descriptor.
Units The Units screen allows the user to enter the units for the selected
analog input channel. The units are displayed on the diagnostic screen
and in datalogging and streaming data. The units may be from 1 to 3
characters in length, and defaults to V (volts).
In the Main Menu, choose Instrument Controls > I/O
l
Configuration > Analog Input Config > select Channel > Units.
The Decimal Places screen allows the user to select how many digits are
displayed to the right of the decimal point, from 0 to 6, with a default
of 2.
In the Main Menu, choose Instrument Controls > I/O
l
Configuration > Analog Input Config > select Channel > Decimal
Places.
ANALOG INPUT DESCRIPTOR:
CURRENTLY: IN1
IN1
ABCDEFGHIJKLMN
OPQRSTUVWXYZ
0123456789 ./-
RANGE AVG DIAGS ALARM
ANALOG INPUT UNITS:
CURRENTLY: V
VN1
ABCDEFGHIJKLMN
OPQRSTUVWXYZ
0123456789 ./-
RANGE AVG DIAGS ALARM
DECIMAL PLACES:
CURRENTLY:
SET TO:
SAVE VALUE
RANGE AVG DIAGS ALARM
BKSP
PAGE
SAVE
BKSP
PAGE
SAVE
2
3 ?
INC/DEC
Thermo Fisher Scientific