Thermo Scientific 5028i Instruction Manual page 105

Service Mode
DATE AND TIME:
19 MAR 2005
PRESS
RANGE
Thermo Fisher Scientific
The Service Mode screen is used to turn the service mode on or off.
Turning service mode "ON" locks out any remote actions and allows
access to parameters and functions that are useful when making
adjustments or diagnosing the Model 5028i. The service (wrench)
icon on the status bar is shown when service mode is on. For more
information about the service mode, see
chapter.
Note The service mode should be turned off when finished, as it
prevents remote operation.
In the Main Menu, choose Instrument Controls > Service Mode.
l
Date/Time
The Date/Time screen allows the user to view and change the system
date and time (24-hour format). The internal clock is powered by its
own battery when instrument power is off.
In the Main Menu, choose Instrument Controls > Date/Time.
l
12:34:56
TO EDIT
AVG DIAGS ALARM
Timezone
The Timezone screen is used to set the timezone for the Network Time
Protocol (NTP) server. This should be set to the timezone that the
instrument is located in. If the exact timezone is not shown in the list,
it may be entered via the C-LINK "tz" command (see Appendix B).
The selections are: UTC (GMT), EST (GMT+5), CST (GMT+6),
MST (GMT+7), PST (GMT+8), YST (GMT+9), HST (GMT+10),
NST (GMT+11), DLW (GMT+12), CET (GMT-1), EET (GMT-
2), BST (GMT-3), DLT (GMT-4), ECH (GMT-5), FOX (GMT-6),
GLF (GMT-7), CCT (GMT-8), JST (GMT-9), GST (GMT-10), LMA
(GMT-11), DLE (GMT-12), EDT (GMT+5/4), CDT (GMT+6/5),
MDT (GMT+7/6), and PDT (GMT+8/7).
s
SERVICE MODE:
CURRENTLY:
SET TO:
TOGGLE VALUE
RANGE AVG DIAGS ALARM
DATE AND TIME:
19 MAR 2005
SETTING: DAYS
RANGE AVG
Instrument Controls Menu
"Service Menu" later in this
OFF
ON ?
12:34:56 ?
SET MONTHS
CHANGE VALUE
SAVE VALUE
DIAGS ALARM
Model 5028i Instruction Manual
Operation
3-51