Custom Ranges; Integration Time; 24-Hour Average - Thermo Scientific 5028i Instruction Manual

Operation

Integration Time

Custom Ranges

Integration Time

24-Hour Average

3-12 Model 5028i Instruction Manual
The Custom Ranges screen is used to define the custom ranges.
The display shows the current custom range. The next line of the display
is used to set the range. For more information about selecting ranges,
see "Range" above.
In the Main Menu, choose Range > Set Custom Ranges > Custom
l
Range 1, 2, or 3.
CUSTOM RANGE 1:
CURRENTLY:
RANGE
Integration time menu allows the operator to select the measurement of
time interval for the channel A or channel B. To adjust the integration
time interval, Integration Time ensure the measured values are
calculated by the average value, and the average value is measured as the
output of the measured value.Integration time interval can be selected
from the 6 values that are preset (15, 20, 30, 40, 45 and 60 minutes).
Note Integration Time B settings please refer to Integration Time A as
following description.
In the Main Menu, choose Integration Time>Integration Time A
l
or Integration Time B.
INTEGRATION TIME:
>INTEGRATION TIME A
INTEGRATION TIME B
RANGE
INTEGRATION TIME A:
CURRENTLY:
SET TO:
RANGE
The 24-Hour Average screen defines a start time during which
concentration measurement is averaged over a daily 24-hours period.
The average concentration of the primary readings are calculated for that
time period and averaged out. A new 24-hour average concentration is
displayed once per day. The display shows the current 24-hour average
PM/PM concentration. The next line of the display is used to change
b
the 24-hour averaging time.
SET TO: 000555.7 ?
MOVE CURSOR
CHANGE VALUE
AVG DIAGS ALARM
s
AVG DIAGS ALARM
20 MIN
15 MIN ?
CHANGE VALUE
SAVE VALUE
AVG DIAGS ALARM
555.6
SAVE
Thermo Fisher Scientific