Thermo Scientific 5028i Instruction Manual page 261

Thermo Fisher Scientific
Send: flow b
Receive: flow b 16.69 LPM
flow pres a/b
This command reports the current flow pressure for the detector, in
mmHg. The following example reports that the flow pressure is 24.1
mmHg.
Send: flow pres a
Receive: flow pres a 24.1 mmHg
Send: flow pres b
Receive: flow pres b 24.1 mmHg
flow temp a/b
This command reports the current flow temperature for the detector, in
degrees C. The following example reports that the flow temperature is
22.3 °C.
Send: flow temp a
Receive: flow temp a 22.3 deg
Send: flow temp b
Receive: flow temp b 22.3 deg
io bd
This command reports the presence of the I/O expansion board (yes/
no). The following example reports the I/O expansion board is present
(yes).
Send: io bd
Receive: io bd yes
mass a/b
This command reports the presence of mass. The following example
reports that the mass is 0.1 mg/m
Send: mass a
Receive: mass a 0.1 mg/m3
Send: mass b
Receive: mass b 0.1 mg/m3
set reset tape counter a/b
This command resets the tape count to zero.
Send: set reset tape counter a
Receive: set reset tape counter a ok
Send: set reset tape counter b
Receive: set reset tape counter b ok
C-Link Protocol Commands
3
.
Model 5028i Instruction Manual
Diagnostics
B-21