Thermo Scientific 5028i Instruction Manual page 287

Thermo Fisher Scientific
Level
Contrast Level
16 80%
17 85%
18 90%
19 95%
20 100%
date
This command reports the current date. The following example reports
the date as April 1, 2009.
Send: date
Receive: date 04-01-09
set date mm-dd-yy
mm = month
dd = day
yy = year
This command sets the date of the analyzer's internal clock. The
following example sets the date to May 1, 2009.
Send: set date 05-01-09
Receive: set date 05-01-09 ok
set default params
This command sets all the parameters to their default values. This does
not affect the factory-calibrated parameters.
Send: set default params
Receive: set default params ok
det
This command reports the status of the detector board (sharp/beta/map/
none). The following example reports that the detector is beta.
Send: det
Receive: det beta
pump
This command reports the current status of pump as on or off. The
following example reports that the pump is set to off.
Send: pump
Receive: pump off
C-Link Protocol Commands
Hardware Configuration
Model 5028i Instruction Manual B-47