Thermo Scientific 5028i Instruction Manual page 138

Operation
Service Menu
Display Pixel Test
Restore User Defaults
RESTORE USER DEFAULTS:
RANGE
Restore Factory Defaults
3-84 Model 5028i Instruction Manual
The Display Pixel Test screen is used to test the LCD display, by
toggling between all pixels on and all pixels off to ensure that they are
functioning properly. The display pixel test screen is visible only when
the instrument is in service mode. For more information on the service
mode, see
In the Main Menu, choose Service > Display Pixel Test.
l
The Restore User Defaults screen is used to reset the user calibration
and configuration values to factory defaults. The restore user defaults
screen is visible only when the instrument is in service mode. For more
information on the service mode, see
chapter.
In the Main Menu, choose Service > Restore User Defaults.
l
RESTORE
AVG DIAGS ALARM
The Restore User Defaults screen is used to reset the user calibration
and configuration values to factory defaults. The restore user defaults
screen is visible only when the instrument is in service mode. For more
information on the service mode, see
chapter.
In the Main Menu, choose Service > Restore User Defaults.
l
CHOOSE LANGUAGE:
CURRENTLY:
SET TO:
RANGE AVG
"Service Mode" earlier in this chapter.
DISPLAY PIXEL TEST:
DURING TEST PRESS
TO EXIT,
BEGIN TEST
GO BACK TO MENU
RANGE AVG
RESTORE USER DEFAULTS:
ARE YOU SURE YOU WANT
PRESS
RANGE
ENGLISH
CHINESE
CHANGE VALUE
SAVE
DIAGS ALARM
OR
TO TOGGLEXXXXXx
DIAGS ALARM
"Service Mode" earlier in this
RESTORE
TO CONFIRM RESTORE
AVG DIAGS ALARM
"Service Mode" earlier in this
xx
TO?x
Thermo Fisher Scientific