Thermo Scientific 5028i Instruction Manual page 256

C-Link Protocol Commands
Alarms
B-16 Model 5028i Instruction Manual
limits in liters per minute/liters per hour. The following example sets the
flow alarm maximum value to 17.34 LPM.
Send: set alarm flow max a 17.34
Receive: set alarm flow max a 17.34 ok
Send: set alarm flow max b 17.34
Receive: set alarm flow max b 17.34 ok
alarm flow pres min a/b
alarm flow pres max a/b
These commands report the current flow pressure alarm minimum and
maximum value settings. The following example reports that the flow
pressure alarm minimum value is -10.0 mmHg.
Send: alarm flow pres min a
Receive: alarm flow pres min a -10.0 mmHg
Send: alarm flow pres min b
Receive: alarm flow pres min b -10.0 mmHg
set alarm flow pres min a/b value
set alarm flow pres max a/b value
These commands set the flow pressure alarm minimum and maximum
values to value, where value is a floating-point number representing flow
pressure alarm limits in millimeters of mercury. The following example
sets the flow pressure alarm maximum value to 100.0 mmHg.
Send: set alarm flow pres max a 100.0
Receive: set alarm flow pres max a 100.0 ok
Send: set alarm flow pres max b 100.0
Receive: set alarm flow pres max b 100.0 ok
alarm flow temp min a/b
alarm flow temp max a/b
This command reports the current flow temperature alarm maximum
value setting. The following example reports that the flow temperature
alarm minimum value is 20.0 °C.
Send: alarm flow temp min a
Receive: alarm flow temp min a 20.0 degC
Send: alarm flow temp min b
Receive: alarm flow temp min b 20.0 degC
set alarm flow temp min a/b value
set alarm flow temp max a/b value
This command sets the flow temperature alarm maximum value
to value, where value is a floating-point number representing flow
temperature alarm limits in °C. The following example sets the flow
temperature alarm maximum value to 70 °C.
Thermo Fisher Scientific