Thermo Scientific 5028i Instruction Manual page 89

Choose Stream Data
Concentrations
Other Measurements
Thermo Fisher Scientific
STREAMING DATA INTERVAL:
CURRENTLY:
SET TO:
RANGE
Note Add Labels, Prepend Timestamp, and Add Flags are toggle items
that change between yes or no when selected.
The Choose Stream Data screen displays a list of the types of data that
can be sent via streaming data. Choices are Concentrations, Other
Measurements, and Analog Inputs (if the I/O expansion board is
installed).
In the Main Menu, choose Instrument Controls > Communication
l
Settings > Streaming Data Config > Item 1–16.
CHOOSE STREAM DATA:
>CONCENTRATIONS
OTHER MEASUREMENTS
ANALOG INPUTS
RANGE
The Concentrations screen allows the user to assign one of the
concentrations to the selected streaming data item. The currently
selected item is shown by "<--" after it. Once an item is selected,
pressing will save the selected streaming data item.
In the Main Menu, choose Instrument Controls > Communication
l
Settings > Streaming Data Config > Item 1–16 select Item >
Concentrations.
CONCENTRATIONS:
>NONE
PM
PMb
AVG PM
AVG PMb
RANGE
The Other Measurements screen allows the user to assign one of the
other available measurement types to the selected streaming data item.
The currently selected item is shown by "<--" after it. Once an item is
selected, pressing
Common Flags and Detector A Flags, see
for data descriptions.
10 SEC
20 SEC ?
CHANGE VALUE
SAVE VALUE
AVG DIAGS ALARM
s
AVG DIAGS ALARM
AVG DIAGS ALARM
will save the selected streaming data item. For
Figure 3–5
Model 5028i Instruction Manual
Operation
Instrument Controls Menu
<--
and Figure 3–6
3-35