Thermo Scientific 5028i Instruction Manual page 88

Operation
Instrument Controls Menu
Communication Protocol
Streaming Data Configuration
Streaming Data Interval
3-34 Model 5028i Instruction Manual
GESYTEC SERIAL NO:
CURRENTLY:
RANGE
The Communication Protocol screen is used to change the protocol
for serial communications. Possible choices include:ESM, C-Link,
MODBUS, Gesytec, and Streaming Data.
In the Main Menu, choose Instrument Controls > Communication
l
Settings > Communication Protocol.
COMMUNICATION PROTOCOL:
CURRENTLY:
RANGE
The Streaming Data Configuration menu is used to allow for
configuration of the 8 streaming data output items, streaming interval,
current data format, and current timestamp setting. The Choose Stream
Data submenu displays a list of the analog output signal group choices
to choose from. Choices are Concentrations, Other Measurements, and
Analog Inputs (if the I/O expansion board option is installed).
In the Main Menu, choose Instrument Controls > Communication
l
Settings > Streaming Data Config.
STREAMING DATA CONFIG
>INTERVAL
ADD LABELS
PREPEND TIMESTAMP
ADD FLAGS
ITEM 1
ITEM 2
ITEM 3
RANGE
The Streaming Data Interval screen is used to adjust how frequently a
new record will be generated. The following interval times are available:
1, 2, 5, 10, 20, 30, 60, 90, 120, 180, 240, and 300 seconds.
In the Main Menu, choose Instrument Controls > Communication
l
Settings > Streaming Data Config > Interval.
SET TO:
CHANGE VALUE
SAVE VALUE
AVG DIAGS ALARM
SET TO: STREAMING ?
CHANGE VALUE
SAVE VALUE
AVG DIAGS ALARM
AVG DIAGS ALARM
0
1 ?
CLINK
10 SEC
NO
YES
YES
PM
PM
PM
Thermo Fisher Scientific