Thermo Scientific 5028i Instruction Manual page 262

C-Link Protocol Commands
Diagnostics
B-22 Model 5028i Instruction Manual
sample rh a/b
This command reports the sample RH, in percent. The following
example reports that the sample RH is 20%.
Send: sample rh a
Receive: sample rh a 20.0%
Send: sample rh b
Receive: sample rh b 20.0%
tape counter a/b
This command reports the number counts which corresponds to the
filter tape movement. The following example reports that the tape count
is 250.
Send: tape counter a
Receive: tape counter a 250
Send: tape counter b
Receive: tape counter b 250
vac pres a/b
This command reports the current vacuum pressure for the detector, in
mmHg. The following example reports that the vacuum pressure is 100
mmHg.
Send: vac pres a
Receive: vac pres a 100.0 mmHg
Send: vac pres b
Receive: vac pres b 100.0 mmHg
vac pres offset a/b
This command reports the vacuum pressure offset. The following
example gets the vacuum pressure offset -1.4.
Send: vac pres offset a
Receive: vac pres offset a -1.4
Send: vac pres offset b
Receive: vac pres offset b -1.4
purge mode a/b
This command get purge mode.The following example get purge mode.
Send: purge mode a
Receive: purge mode a 1.000
Send: purge mode b
Receive: purge mode b 1.000
set purge mode a/b on
This command sets purge mode on. The following example set purge
mode on.
Thermo Fisher Scientific