Figure 3-5. Common Flags - Thermo Scientific 5028i Instruction Manual

Analog Input Configuration
Thermo Fisher Scientific
Concentrations Other Measurements
Flow Temp
Flow Vol
Beta
Beta Raw
Alpha Raw
Mass
Beta Zero
External Alarms
Beta Ref
Common Flags
Det A Flags
The Analog Input Configuration menu displays a list of the 8 analog
input channels available for configuration. This screen is only displayed
if the I/O expansion board option is installed. Configuration includes
entering the Descriptor, Units, Decimal Places, choice of 1–10 points in
the table, and corresponding number of points selected.
In the Main Menu, choose Instrument Controls > I/O
l
Configuration > Analog Input Config.
ANALOG INPUT CONFIG:
>CHANNEL 1
CHANNEL 2
CHANNEL 3
CHANNEL 4
CHANNEL 5
CHANNEL 6
CHANNEL 7
RANGE
ANALOG INPUT 01 CONFIG:
>DESCRIPTOR
UNITS
DECIMAL PLACES
TABLE POINTS
POINT 1
POINT 2
RANGE
Note The Analog input config screen is visible only when the I/O
expansion board option is installed and the service mode is on . For
more information on the service mode, see
"Program Versions Voltages".
Analog Inputs
Analog Input 8 (if the I/O expansion board
is installed)
AVG DIAGS ALARM
AVG DIAGS ALARM
"Service
s
Model 5028i Instruction Manual
Operation
Instrument Controls Menu
IN1
IN2
IN3
IN4
IN5
IN6
IN7
IN1
V
2
2
Mode" earlier in
3-47