Average Pm/Pm; Min And Max Average Pm/Pm Concentration Limits; Instant Pm/Instant Pm - Thermo Scientific 5028i Instruction Manual

Average PM/PM

Min and Max Average PM/PM
Concentration Limits

Instant PM/Instant PM

Thermo Fisher Scientific
The Average PM screen displays the current average PM concentration
b
and sets the minimum and maximum alarm limits. Acceptable alarm
limits range from 0 to 10000 µg/m
PM concentration goes beyond either the minimum or maximum limit,
an alarm is activated and the alarm (bell) icon appears in the status bar
on the Run screen and in the Main Menu.
Note Avg PM
settings please refer to Avg PM as following description.
b
s
In the Main Menu, choose Alarms > Conc Alarms > Avg PM/Avg
l
.
PM
b
AVERAGE PM CONC:
ACTUAL
>MIN
MAX
RANGE
The Minimum Average PM/PM
b
used to change the minimum average PM/PM
limit. The minimum and maximum average PM/PM
screens function the same way.
In the Main Menu, choose Alarms > Conc Alarms > Avg PM or Avg
l
PM > Min or Max.
b
AVERAGE PM CONC:
ACT MIN:
SET MIN:
RANGE
The Instant PM screen displays the current instant PM/PM
b
concentration and sets the minimum and maximum alarm limits.
Acceptable alarm limits range from -10 to 10000 µg/m
3
mg/m . If the instant PM/PM
minimum or maximum limit, an alarm is activated and the alarm (bell)
icon appears in the status bar on the Run screen and in the Main Menu.
Note Instant PM
description.
s
In the Main Menu, choose Alarms > Conc Alarms > Inst PM or
l
.
Inst PM
b
3
or 0 to 10 mg/m
AVG DIAGS ALARM
Concentration alarm limit screen is
b
MOVE CURSOR
CHANGE VALUE
AVG DIAGS ALARM
concentration goes beyond either the
b
settings please refer to Instant PM as following
b
3
. If the average
0.0
0.0
10000
concentration alarm
b
concentration
b
0.0
xxxxx100 ?
SAVE
b
3
or -.01 to 10
Model 5028i Instruction Manual
Operation
Alarms Menu
3-69