Operation
Instrument Controls Menu
Analog Inputs
Commit Content
3-28
Model 5028i Instruction Manual
Figure 3–6. Detector A Flag
The Analog Inputs screen allows the user to select the parameter (none
or analog inputs 1–8) to the selected record field. The selected item is
shown by "<--" after it. Note that at this point, pressing
that these are proposed changes as opposed to implemented changes.
To change the selected record format and erase record log file data, see
"Commit
Content" below.
Note The Analog Inputs is visible only if the I/O expansion board is
installed.
s
In the Main Menu, choose Instrument Controls > Datalogging
l
Settings > Select Content > select Field > Analog Inputs.
ANALOG INPUTS:
>NONE
ANALOG IN 1
ANALOG IN 2
ANALOG IN 3
ANALOG IN 4
RANGE
The Commit Content screen is used to save any changes that have been
made to any of the record fields for the selected record type. Saving
changes will erase record log file data for that record type. If no changes
have been made "NO CHANGES TO RECORD LIST!" will appear.
For more information about selecting the content of logged data fields,
see
"Select
Content" above.
AVG
DIAGS ALARM
indicates
Thermo Fisher Scientific