Figure 2-10 Screw Positions; Figure 2-11 Mounting The Chassis - NEC SL2100 Hardware Manual

ISSUE 1.0
2. Install three screws into the wall. The screw heads must stand off from the wall about 2.5 mm
(0.098") to 3.5 mm (0.138").
353.25 mm
(13.907")
• The screw diameter is 4 mm (0.158") to 4.5 mm (0.177").
• Wall-Mounting Screws (M4.1x 25: 4 pcs) are attached to the Chassis.
The other screw is installed after slide the chassis into the position.
3. Align the three holes on the back of the Chassis with the three screws installed in the wall.
Hardware Manual
210 mm (8.268")
266.5 mm
(10.492")
195.9 mm
(7.713")

Figure 2-10 Screw Positions

Screw head
Screw head

Figure 2-11 Mounting the Chassis

2.5 mm (0.098") -
3.5 mm (0.138")
Hook
SL2100
2-9