UNIVERGE SV8100
System Hardware Manual
4.
Lift and remove the Tilt Legs.
4.9.2
Install Tilt Legs
1.
Place the telephone on a flat surface (button side down).
2.
Lay the adjustable Tilt legs on top of the telephone. See
5-41 Attach Tilt Legs to DT300/DT700 Series
Figure 5-41 Attach Tilt Legs to DT300/DT700 Series Terminal
3.
Push the Tilt Legs upward until they snap into place.
4.
Lift both ends of Tilt Legs until they come together (refer to
Figure 5-42 Connecting the Tilt Legs on page
Issue 5.0
Figure
Terminal.
5-44).
5 - 43