Install Tilt Legs - NEC Univerge SV9100 Hardware Manual

UNIVERGE SV9100
System Hardware Manual
telephone. See
3. Push downward (two arrows) and slide downward (refer to
Figure 5-60 Remove Tilt Legs from Multiline
4. Lift and remove the Tilt Legs.
4.11.2

Install Tilt Legs

1. Place the telephone on a flat surface (button side down).
2. Lay the adjustable Tilt legs on top of the telephone. See
Figure 5-59 Separating the Tilt
Figure 5-59 Separating the Tilt Legs
Figure 5-60 Remove Tilt Legs from Multiline Terminal
Issue 1.2
Legs.
Terminal.
Figure
5 - 67