Tcp/Ip Configuration - NEC Aspire 16CNFU Manual

Chapter 4 : Aspire Conference Bridge PCB Web Manager
Using the Web Manager
TCP/IP ConÞguration
The TCP/IP ConÞguration page allows the installer to modify the TCP/IP settings. When the Use DHCP for
TCP/IP ConÞguration
TCP/IP Manually
boxes. After clicking Submit , the user must reset the PCB for the new network settings to take affect.
● Host Name
DeÞne the host name of the 16CNFU PCB.
● IP Address
DeÞne the IP address of the 16CNFU PCB.
● Netmask Address
DeÞne the subnet mask address of the 16CNFU PCB.
● Gateway Address
DeÞne the gateway address of the 16CNFU PCB.
● Domain Name
DeÞne the domain name of the 16CNFU PCB.
● Nameserver Address
DeÞne the IP address of the nameserver to be used for the DNS lookups.
38 ◆
is set, the PCB uses DHCP to obtain the TCP/IP information. When the ConÞgure
button is checked, the PCB uses the information supplied by the users in the IP Settings text
When "Use DHCP" is checked, you will be required to consult with your Network
Administrator to obtain the DHCP IP Address that has been assigned to the Conference
Bridge 16CNFU PCB.
Aspire Conference Bridge Manual