Ip Telephone Terminal Basic Data Setup - NEC univerge SV9100 Programming Manual

Issue 4.0
Level:
IN
Description
Use Program 15-05 : IP Telephone Terminal Basic Data Setup to set up the basic settings for an IP
telephone.
Input Data
Extension Number
Item
Item
No.
01 Terminal Type
02
IP Phone Fixed
Port
Assignment
04
Nickname
07 Using IP
Address
09 Call Procedure
Port
11
DT800/DT700
C/CTR Port
SV9100 Programming Manual
Program 15 : Extension, Basic Setup

15-05 : IP Telephone Terminal Basic Data Setup

Input Data
1 = H.323
2 = SIP
3 = None
4 = DT800/DT700
MAC address
00-00-00-00-00-00 to
FF-FF-FF-FF-FF-FF
Up to 48 characters
0.0.0.0~255.255.255.255
Default
3 Viewing Only – No changes
permitted
00-00-00-00-00-00
MAC Address of registered
SIP MLT phone is stored
and/or can input the MAC
address of an SIP MLT
phone so when it comes
online it is provided with the
extension in which the MAC
address matches.
No setting
Nickname section on Invite
message. Example:
Extension 100 has a
Nickname set to PAUL.
Extension 101 has
command 15-05-17 set to
Nickname. The inbound call
to extension 101, from 100,
shows PAUL.
0.0.0.0 Informational Only
registered IP Phones
0 Viewing Only – No changes
permitted
0~65535
001 ~ 960
Related
Description
Program
15-05-01
15-05-17
15-05-01
No setting
2-199