Description - NEC Univerge SV9100 Hardware Manual

UNIVERGE SV9100
System Hardware Manual
Figure 4-4 GCD-CP10 Blade with Daughter Boards Installed
3.1.1

Description

The GCD-CP10 controls all the functions and operations of the
SV9100 system using the system software loaded into the
GCD-CP10 memory. The system software can be upgraded as new
software becomes available.
One GCD-CP10 blade must be installed in the Controlling Chassis.
The GCD-CP10 functions are:
 Music on Hold tone Circuit, External Source Control Circuit
 Voice Mail/VRS interface Circuit
 VM Recording time
SD-A1 memory card: 12 hours
SD-B1 memory card: 115 hours
Issue 1.2
4 - 17