4A- Wall Mount The Sl2100 System - NEC SL2100 Quick Install Manual

Wall Mount the SL2100 System

4a- Wall Mount the SL2100 system

Installation Considerations:

To avoid electric shock or damage do not plug in or turn on the system power before completing the
installation.

Avoid working with the system during electrical storms.

Use the power cord supplied with the product.

Do not bundle power cords together, the cords may overheat.

Ensure the system has a suitable Earth Ground connection.
Environmental Considerations – Be sure the system is not:

In direct sunlight or in hot, cold or humid places.

In dusty areas or in areas where sulfuric gasses are produced.

In places where shocks or vibrations are frequent or strong.

In places where water or other fluids may come into contact with the equipment.

In areas near electric welders or machines that emit high frequency radiation.

Near computers, microwaves, air conditioners etc.

Near radio antennas (including shortwave).

If you are installing the optional expansion cabinets ensure there is sufficient wall space and ventilation.
Refer to the wall mounting diagrams below.
1 Allow 930mm x
875mm (W x H)
wall space for the
SL2100 system.
The system is
330mm x 435mm
x 93mm
(W x H x D)
! You will need
more space if you
are installing
optional expansion
cabinets.
Refer to the
SL2100 Hardware
Manual for
instructions.
Fit three screws to
the wall in the
holes shown.
Leave 2.5~3.5 mm
stand off.
Hook the SL2100
chassis onto the
three screw
heads.
Quick Install Guide – SL2100 with ISDN PRI Trunks rev 1.1
Ensure the wall surface is flat and that you use the correct wall plugs for the type of
wall material. Screws are supplied with the SL2100 chassis.
15