YASKAWA Sigma-V Series User Manual page 324

(3) Related Parameters
The following table lists parameters related to this function and their possibility of being changed while exe-
cuting this function or of being changed automatically after executing this function.
• Parameters related to this function
These are parameters that are used or referenced when executing this function.
• Allowed changes during execution of this function
Yes : Parameters can be changed using SigmaWin+ while this function is being executed.
No : Parameters cannot be changed using SigmaWin+ while this function is being executed.
• Automatic changes after execution of this function
Yes : Parameter set values are automatically set or adjusted after execution of this function.
No : Parameter set values are not automatically set or adjusted after execution of this function.
Parameter
Pn401 Torque Reference Filter Time Constant
Pn408 Torque Related Function Switch
Pn409 1st Notch Filter Frequency
Pn40A 1st Notch Filter Q Value
Pn40C 2nd Notch Filter Frequency
Pn40D 2nd Notch Filter Q Value
Name
7.22 Online Vibration Monitor (Fn207)
Mid-execution Automatic
changes changes
No Yes
Yes Yes
No Yes
No No
No No
No No
7
7-39