Monitoring Output Signals; Displaying Output Signal Status - YASKAWA Sigma-V Series User Manual

8.5

Monitoring Output Signals

The status of output signals can be checked with the output signal monitor (Un006). The procedure for dis-
playing the status, the method of interpreting the display, and a display example are shown below.

8.5.1 Displaying Output Signal Status

Use the following steps to display the output signal status.
Display after
Step
Operation
1
2
3
Output signal display
4
Keys
MODE/SET
MODE/SET
MODE/SET
status
MODE/SET
Press the MODE/SET Key to select the monitor display.
DATA/
Press the UP or DOWN Key to select Un006.
DATA/
The present status can be displayed on the 7-segment dis-
play on the panel operator by pressing the DATA/SHIFT
Key for approximately one second. Refer to 8.5.2 Interpret-
DATA/
ing Output Signal Display Status.
Press the DATA/SHIFT Key for approximately one second
to return to the display of step 2.
DATA/

8.5 Monitoring Output Signals

Operation
8
8-7