YASKAWA Sigma-V Series User Manual page 300

Display after
Step
Operation
4
5
6
7
8
9
10
7.8 Offset Adjustment of Analog Monitor Output (Fn00C)
Keys
Press the DATA/SHIFT Key. Offset data will be displayed
as shown on the left.
MODE/SET DATA/
Press the UP or DOWN Key to change the data.
MODE/SET DATA/
Press the DATA/SHIFT Key to return to the screen as
shown on the left.
MODE/SET DATA/
Press the MODE/SET Key to switch to channel 2 (analog
monitor 2) monitor output.
MODE/SET DATA/
Press the DATA/SHIFT Key. Offset data will be displayed
as shown on the left.
MODE/SET DATA/
Press the UP or DOWN Key to change the data.
MODE/SET DATA/
Press the DATA/SHIFT Key for approximately one second.
"Ch2-o" is displayed, and then "Fn00C" is displayed again.
MODE/SET DATA/
(cont'd)
Operation
7
7-15