Setting Parameters - YASKAWA Sigma-V Series User Manual

2 Panel Operator

2.3.3 Setting Parameters

• Notation Example
Panel Operator Display
2.3.3
Setting Parameters
(1) How to Make Numeric Settings Using Parameters
This section describes how to make numeric settings using parameters.
Parameters with Setting Ranges of Up to Five Digits
The example below shows how to change the speed loop gain (Pn100) from "40.0" to "100.0."
Step
1
2
3
4
5
6
2-6
(Display Example for Pn002)
Digit Notation
Notation
Pn002.0
1st digit
2nd digit Pn002.1
Pn002.2
3rd digit
4th digit Pn002.3
Display after
Operation
MODE/SET
MODE/SET
MODE/SET
MODE/SET
Display flashes.
MODE/SET
MODE/SET
Meaning Notation
Indicates the value for the
Pn002.0 = x
1st digit of parameter Pn002.
or n.
Indicates the value for the
Pn002.1 = x
2nd digit of parameter Pn002.
or n.
Pn002.2 = x
Indicates the value for the
or n. x
3rd digit of parameter Pn002.
Indicates the value for the
Pn002.3 = x
4th digit of parameter Pn002.
or n.x
Keys
Press the MODE/SET Key to select the parameter setting.
If Pn100 is not displayed, press the UP or the DOWN Key
to select Pn100.
DATA/
Press the DATA/SHIFT Key for approximately one sec-
ond. The current data of Pn100 is displayed.
DATA/
Press the DATA/SHIFT Key to select "4".
"4" will flash and be able to be changed.
DATA/
Keep pressing the UP Key until "0100.0" is displayed.
DATA/
Press the MODE/SET Key. The value flashes and is saved.
The data for the speed loop gain (Pn100) is changed from
"40.0" to "100.0."
DATA/
Press the DATA/SHIFT Key for approximately one sec-
ond. "Pn100" is displayed again.
DATA/
Analog
Setting Notation
Meaning
Indicates that the value for the
1st digit of parameter Pn002 is x.
x
Indicates that the value for the
2nd digit of parameter Pn002 is x.
x
Indicates that the value for the
3rd digit of parameter Pn002 is x.
Indicates that the value for the
4th digit of parameter Pn002 is x.
Operation