At+Copn Read Operator Names; At+Cfun Set Phone Functionality - SimCom SIM5300E At Command Manual

Reference
3GPP TS 27.007 [13]
3.2.37

AT+COPN Read Operator Names

AT+COPN Read Operator Names
Test Command
AT+COPN=?
Execution Command
AT+COPN
Parameters
Reference
3GPP TS 27.007 [13]
3.2.38

AT+CFUN Set Phone Functionality

SIM5300E AT Command Manual V1.02
<GSM_AcT> GSM access technology
0 access technology not selected
1 access technology selected
<GSM_Compact_AcT> GSM compact access technology
0 access technology not selected
1 access technology selected
<UTRAN_AcT> UTRAN access technology
0 access technology not selected
1 access technology selected
<EUTRAN_AcT> EUTRAN access technology
0 access technology not selected
1 access technology selected
Response
OK
Response
+COPN: <numeric1>,<alpha1>
[<CR><LF>+COPN: <numeric2>,<alpha2>
[...]]
OK
If error is related to ME functionality:
+CME ERROR: <err>
<numericn> String type (string should be included in quotation marks):
operator in numeric format (see +COPS)
<alphan> String type (string should be included in quotation marks):
operator in long alphanumeric format (see +COPS)
57