At Commands For Status Control; At+Cfun Set Phone Functionality - SimCom SIM7500 Series At Command Manual

4

AT Commands for Status Control

4.1

AT+CFUN Set phone functionality

Description
This command is used to select the level of functionality
functionality" is where the highest level of power is drawn. "Minimum functionality" is where
minimum power is drawn. Level of functionality between these may also be specified by
manufacturers. When supported by manufacturers, ME resetting with
utilized.
NOTE: AT+CFUN=6 must be used after setting AT+CFUN=7. If module in offline mode, must
execute AT+CFUN=6 or restart module to online mode.
SIM PIN References
NO 3GPP TS 27.007
Syntax
Test Command
AT+CFUN=?
Read Command
AT+CFUN?
Write Command
AT+CFUN=<fun>[,<rst>]
Defined values
<fun>
0 – minimum functionality
1 – full functionality, online mode
SIM7500_SIM7600 Series_AT Command Manual_V1.07
Responses
+CFUN: (list of supported <fun>s), (list of supported <rst>s)
OK
ERROR
+CME ERROR: <err>
Responses
+CFUN: <fun>
OK
ERROR
+CME ERROR: <err>
Responses
OK
ERROR
+CME ERROR: <err>
Smart Machine Smart Decision
<fun> in the ME. Level "full
<rst> parameter may be
51 2017-12-25