At+Cgdcont Define Pdp Context - SimCom SIM7500 Series At Command Manual

[,<cid>]
Defined values
<state>
Indicates the state of PDP context activation:
0 – deactivated
1 – activated
<cid>
A numeric parameter which specifies a particular PDP context definition (see
command).
1...24,100...179
Examples
AT+CGACT?
+CGACT: 1,1
OK
AT+CGACT=?
+CGACT: (0,1)
OK
AT+CGACT=0,1
OK
9.4

AT+CGDCONT Define PDP context

Description
The set command specifies PDP context parameter values for a PDP context identified by the
(local) context identification parameter <cid>. The number of PDP contexts that may be in a
defined state at the same time is given by the range returned by the test command. A special form of
the write command
undefined.
SIM PIN References
YES 3GPP TS 27.007
Syntax
Test Command
AT+CGDCONT=?
SIM7500_SIM7600 Series_AT Command Manual_V1.07
ERROR
+CME ERROR:
(AT+CGDCONT=<cid>)
Responses
+CGDCONT: (range of supported<cid>s),<PDP_type>,,,(list of
supported <d_comp>s),(list of supported <h_comp>s)(list of
<ipv4_ctrl>s),(list of <emergency_flag>s)
Smart Machine Smart Decision
<err>
causes the values for context
196
AT+CGDCONT
<cid> to become
2017-12-25