At+Cgdcont Define Pdp Context - SimCom SIM5300E At Command Manual

Write Command
AT+CGATT=<state>
Parameters
Reference
6.2.2

AT+CGDCONT Define PDP Context

AT+CGDCONT Define PDP Context
Test Command
AT+CGDCONT=?
Read Command
AT+CGDCONT?
Write Command
AT+CGDCONT=<cid>[,<PDP_t
ype>[,APN>[,<PDP_addr>[,<d
_comp>[,<h_comp>]]]]]
Parameters
SIM5300E AT Command Manual V1.02
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
<state> Indicates the state of GPRS attachment
0 Detached
1 Attached
Other values are reserved and will result in an ERROR response to the Write
Command.
Response
+CGDCONT: (range of supported <cid>s),<PDP_type>,,,(list of supported
<d_comp>s),(list of supported<h_comp>s)
[<CR><LF>+CGDCONT: (range of supported <cid>s), <PDP_type>,,,
(list of supported<d_comp>s),(list ofsupported <h_comp>s) [...]]
OK
Response
+CGDCONT:
<cid>,<PDP_type>,<APN>,<PDP_addr>,<data_comp>,<head_comp>
[<CR><LF>+CGDCONT:<cid>,<PDP_type>,<APN>,<PDP_addr>,<data_comp>,
<head_comp>
[...]]
OK
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
<cid> (PDP Context Identifier) a numeric parameter which specifies a
particular PDP context definition. The parameter is local to the TE-MT
interface and is used in other PDP context-related commands. The range of
permitted values (minimum value=1) is returned by the test form of the
command.
126