Camshaft Position Sensor - Subaru Legacy 2004 Service Manual

FUEL INJECTION (FUEL SYSTEMS)

6. Camshaft Position Sensor

A: REMOVAL
1) Disconnect the ground cable from battery.
2) Disconnect the connector from camshaft posi-
tion sensor.
3) Remove the bolt which installs camshaft position
sensor to the support.
4) Remove the bolt which installs camshaft position
sensor support to camshaft cap LH.
5) Remove the camshaft position sensor and the
support as a unit.
Camshaft Position Sensor
6) Remove the camshaft position sensor itself.
B: INSTALLATION
Install in the reverse order of removal.
IN-00203
Tightening torque:
FU-01335
FU-00177
FU-00178
FU(H4SO 2.0)-22
Camshaft position sensor support
!
6.4 N m (0.65 kgf-m, 4.7 ft-lb)
Camshaft position sensor
!
6.4 N m (0.65 kgf-m, 4.7 ft-lb)
FU-00179