Camshaft Position Sensor - Subaru Legacy 2002 Service Manual

6. Camshaft Position Sensor

S135041
A: REMOVAL
S135041A18
1) Disconnect battery ground cable.
2) Disconnect connector from camshaft position
sensor.
3) Remove bolt which installs camshaft position
sensor to camshaft position sensor support.
CAMSHAFT POSITION SENSOR
G6M0095
B2M4263
B2M2375
FU(w/oOBD)-29
4) Remove bolt which installs camshaft position
sensor support to camshaft cap LH.
5) Remove camshaft position sensor and cam-
shaft position sensor support as a unit.
6) Remove camshaft position sensor itself.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
¼ Camshaft position sensor support;
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
¼ Camshaft position sensor;
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
Fuel Injection (Fuel Systems)
B2M2321
B2M2322
S135041A11