Subaru Legacy 2004 Service Manual page 394

SPEED CONTROL SYSTEMS
2. Accelerator Pedal
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Disconnect the connector.
3) Remove the nut securing accelerator pedal as-
sembly.
• LHD model
T
• RHD model
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
!
18 N m (1.8 kgf-m, 13.0 ft-lb)
C: DISASSEMBLY
NOTE:
Accelerator pedal cannot be disassembled.
Accelerator Pedal
T
SP-02001
T
T
SP-00052
SP(H4SO 2.0)-4