Engine Coolant Temperature Sensor - Subaru Legacy 2004 Service Manual

Hide thumbs Also See for Legacy 2004:

Table of Contents

Engine Coolant Temperature Sensor

FUEL INJECTION (FUEL SYSTEMS)

4. Engine Coolant Temperature

1) Disconnect the ground cable from battery.

2) Remove the generator. <Ref. to SC(H4SO 2.0)-

14, REMOVAL, Generator.>

3) Disconnect the connectors from engine coolant

temperature sensor.

4) Remove the engine coolant temperature sensor.

B: INSTALLATION

Install in the reverse order of removal.

Tightening torque:

m (1.8 kgf-m, 13.0 ft-lb)

FU(H4SO 2.5)-20

Table of Contents