Camshaft Position Sensor - Subaru Legacy 2003 Service Manual

FUEL INJECTION (FUEL SYSTEMS)

6. Camshaft Position Sensor

A: REMOVAL
1) Disconnect battery ground cable.
2) Disconnect connector from camshaft position
sensor.
3) Remove bolt which installs camshaft position
sensor to camshaft position sensor support.
4) Remove bolt which installs camshaft position
sensor support to camshaft cap LH.
CAMSHAFT POSITION SENSOR
FU-00009
FU-00147
FU-00177
FU-00178
FU(H4SOw/oOBD)-28
5) Remove camshaft position sensor and camshaft
position sensor support as a unit.
6) Remove camshaft position sensor itself.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
• Camshaft position sensor support;
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
• Camshaft position sensor;
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
FU-00179