Subaru Legacy 2004 Service Manual page 158

NOTE:
If fuel hoses or clamps are damaged, replace them
with new ones.
Tightening torque (Hose clamp screw):
!
1.25 N m (0.13 kgf-m, 0.94 ft-lb)
(A) Fuel delivery hose
(B) Return hose
(C) Evaporation hose
3) Install the EGR pipe to intake manifold. (EC, EK,
K4 model)
Tightening torque:
!
34 N m (3.4 kgf-m, 24.6 ft-lb)
4) Connect the connector to camshaft position sen-
sor.
5) Connect the connector to power steering pump
switch (A).
Intake Manifold
(A)
(C)
(B)
FU-02062
FU-00148
FU-01335
FU(H4SO 2.0)-13
FUEL INJECTION (FUEL SYSTEMS)
6) Connect the connector to oil pressure switch (B).
(A)
7) Connect the connector to crankshaft position
sensor.
8) Connect the knock sensor connector.
9) Connect the connectors to engine coolant tem-
perature sensor.
10) Connect the PCV hose to intake manifold.
(B)
FU-01087
FU-00056
FU-01334
FU-00055