Radiator - Subaru Legacy 2004 Service Manual

COOLING

6. Radiator

A: REMOVAL
1) Set the vehicle on a lift.
2) Disconnect the ground cable from battery.
3) Lift-up the vehicle.
4) Remove the under cover.
5) Remove the heat shield cover from radiator.
(Model without ATF warmer)
6) Drain engine coolant completely.
<Ref. to CO(H4SO 2.0)-13, DRAINING OF EN-
GINE COOLANT, REPLACEMENT, Engine Cool-
ant.>
Radiator
7) Disconnect the connector (A) of radiator main
fan motor and connector (B) of sub fan motor.
IN-00203
8) Disconnect the radiator outlet hose from thermo-
stat cover.
CO-00273
9) Disconnect the ATF cooler hoses from ATF
pipes. (Model without ATF warmer)
Plug the ATF pipe to prevent ATF leaks.
10) Lower the vehicle.
11) Disconnect the over flow hose.
12) Remove the reservoir tank. <Ref. to CO(H4SO
2.0)-29, REMOVAL, Reservoir Tank.>
CO(H4SO 2.0)-20
(A)
(B)
CO-00274
CO-00275
CO-00270
CO-00253