FUEL INJECTION (FUEL SYSTEMS)
6. Camshaft Position Sensor
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Disconnect the connector from camshaft posi-
tion sensor.
3) Remove the bolt which installs camshaft position
sensor to the support.
4) Remove the bolt which installs the camshaft po-
sition sensor support to camshaft cap LH.
5) Remove the camshaft position sensor and the
support as a unit.
Camshaft Position Sensor
6) Remove the camshaft position sensor itself.
B: INSTALLATION
Install in the reverse order of removal.
IN-00203
Tightening torque:
FU-01335
FU-00177
FU-00178
FU(H4SO 2.5)-22
Camshaft position sensor support
!
6.4 N
m (0.65 kgf-m, 4.7 ft-lb)
Camshaft position sensor
!
6.4 N
m (0.65 kgf-m, 4.7 ft-lb)
FU-00179