Crankshaft Position Sensor - Subaru Legacy 2004 Service Manual

Hide thumbs Also See for Legacy 2004:

Table of Contents

5. Crankshaft Position Sensor

1) Disconnect the ground cable from battery.

2) Remove the bolt which installs crankshaft posi-

tion sensor to cylinder block.

3) Remove the crankshaft position sensor, and dis-

connect the connector from it.

Crankshaft Position Sensor

B: INSTALLATION

Install in the reverse order of removal.

Tightening torque:

FU(H4SO 2.5)-21

FUEL INJECTION (FUEL SYSTEMS)

m (0.65 kgf-m, 4.7 ft-lb)

Table of Contents