Subaru Legacy 2004 Service Manual page 185

FUEL INJECTION (FUEL SYSTEMS)
12) Remove the rear brake caliper and tie it to the
side of vehicle body.
13) Remove the parking brake cable from parking
brake assembly. <Ref. to PB-7, REMOVAL, Park-
ing Brake Assembly (Rear Disc Brake).>
14) Lift-up the vehicle.
15) Remove the rear exhaust pipe.
<Ref. to EX(H4SO 2.0)-11, REMOVAL, Rear Ex-
haust Pipe.>
16) Remove the propeller shaft. <Ref. to DS-10,
REMOVAL, Propeller Shaft.>
17) Remove the heat shield cover.
18) Disconnect the connector from rear ABS wheel
speed sensor.
Fuel Tank
19) Remove the bolts which install parking brake
cable clamp.
FU-00462
20) Remove the rear suspension assembly.
CAUTION:
A helper is required to perform this work.
(1) Support the rear differential with transmis-
sion jack.
(2) Remove the bolt which installs rear shock
absorber to rear suspension arm.
FU-01129
FU(H4SO 2.0)-40
FU-01130
FU-01131
FU-01132