Front Exhaust Pipe - Subaru Legacy 2004 Service Manual

Hide thumbs Also See for Legacy 2004:

Table of Contents

2. Front Exhaust Pipe

1) Disconnect the ground cable from battery.

2) Disconnect the front oxygen (A/F) sensor con-

3) Lift-up the vehicle.

4) Disconnect the rear oxygen sensor connector.

5) Separate the center exhaust pipe from rear ex-

6) Remove the under cover.

Front Exhaust Pipe

7) Remove the nuts which hold front exhaust pipe

onto cylinder heads.

Be careful not to pull down the front and center

exhaust pipe assembly.

8) Remove the bolt which holds center exhaust

pipe to hanger bracket.

9) Remove the front and center exhaust pipe as-

sembly from the vehicle.

• Be careful not to let the front and center ex-

haust pipe assembly fall off when removing as

it is quite heavy.

• After removing the front and center exhaust

pipe assembly, do not apply excessive pulling

force on the rear exhaust pipe.

10) Separate the front exhaust pipe from center ex-

EX(H4SO 2.0)-7

Table of Contents