Subaru Legacy 2004 Service Manual page 90

PROCEDURE
15. Engine oil
16. Transmission gear oil
17. AT front differential oil
18. Engine coolant
19. Clutch fluid
20. Window washer fluid
21. Front hood latch check
22. Keyless entry system
23. Seat
24. Seat belt
25. Wheel alignment
CHECKS WITH ENGINE RUNNING
PROCEDURE
26. Test mode connector
27. Immobilizer system
28. Starting condition
29. Exhaust system
30. Indicator and warning lights
31. Clock
32. Audio
33. Navigation system
34. Front accessory power supply socket
35. Lighting system
36. Wiper deicer
37. Rear fog light
38. Illumination control
39. Window washer
40. Wiper
41. Power window operation check
42. Cargo fan
43. Sunroof
44. Door mirror
DYNAMIC TEST WITH VEHICLE RUNNING
PROCEDURE
45. Brake test
46. Parking brake
47. AT shift control
48. Heater & ventilation
49. Air conditioner
50. Cruise control
CHECKS AFTER DYNAMIC TEST
PROCEDURE
51. ATF level
52. Power steering fluid level
Pre-delivery Inspection
Check that the oil level is normal.
Check that the transmission gear oil level is normal.
Check that the AT front differential oil level is normal.
Check that the engine coolant level is normal.
Check that the clutch fluid level is normal.
Check that the window washer fluid level is normal.
Check that the hood is closed and latched securely.
Check that the keyless entry system operates normally.
(1) Check the seat surfaces for stain or dirt.
(2) Check the seat installation conditions and functionality.
Check the seat belt installation conditions and functionality.
Check that the wheel alignments are properly adjusted.
Test mode connectors
(1) Check that the engine starts with all keys that are equipped on vehicle.
(2) 60 seconds after turning ignition switch from ON to ACC or OFF, or imme-
diately after removing key, check that the security indicator light blinking.
Start the engine and check that the engine starts smoothly.
Check that the exhaust noise is normal and no leaks are found.
Check that all the indicator and warning lights are gone out.
Check that the clock operates normally.
Check the radio, CD and MD player for normal operation.
(1) Check all display functions for normal operation.
(2) Check the map disc (DVD) are provided on vehicle.
(3) Check that the navigation system operates normally.
Check that the front accessory power socket operates normally.
Check that the lighting system operates normally.
Check that the wiper deicer operates normally.
Check that the rear fog light operates normally.
Check that the illumination control operates normally.
Check that the window washer system operates normally.
Check that the wiper system operates normally.
Check the power window for normal operations.
Check that the cargo fan operates normally.
Check that the sunroof operates normally.
Check that the remote control mirror operates normally.
Check the foot brake for normal operations.
Check the parking brake for normal operations.
Check that the AT shift patterns are correct.
Check that the heater & ventilation system operates normally.
Check that the air conditioner operates normally.
Check that the cruise control system operates normally.
Check that the ATF level is correct.
Check that the power steering fluid level is normal.
PI-3
PRE-DELIVERY INSPECTION
Check point
Check point
Check point
Check point